Product Series
1. Robust structure, reliable and durable, long lifespan, and corrosion-resistant. 2. Compared to orifice plates, it has low pressure loss and saves energy. 3. No flow calibration required. 4. Pressure tapping method: Corner tapping. 5. High accuracy, flow coefficient uncertainty is 0.8%~1.2%. 6. High temperature and high pressure resistant, stable performance, and long service life. 7. Nominal diameter: DN50-DN500
Strong ability to resist upstream interference, and is not affected by downstream fluid parameters. It operates stably and can be calibrated on-site using actual gas (natural gas).
The straight pipe segment is short, with a length of 0.6D0 for the front straight pipe segment and 0.2D0 for the rear straight pipe segment (Note: D0 is the actual inner diameter of the process pipe)
Accuracy Level: 1.0, 1.5 (Higher accuracy can be achieved through field calibration)
Nominal Diameter: DN25-DN600 (larger diameters available upon negotiation)
Solid structure, reliable and durable, high temperature and high pressure resistant
Accuracy level: 1.5~2.5. For higher accuracy requirements, on-site calibration is available at our company.
Structural Features: Equipped with a built-in measuring short tube, the probe is ensured to be inserted vertically into the pipe upon leaving the factory. The pressure tap is aligned with the flow direction to ensure measurement accuracy. If the flow rate is too small, the diameter of the measuring tube can be reduced to increase the differential pressure signal.
Features on-site indication, can be equipped with photoelectric pulse transmitter or smart meter head, outputting pulse or current signals.
Features on-site indication, equipped with a photoelectric pulse transmitter or smart meter, outputting pulse and current signals.
Features on-site indication, can be equipped with photoelectric pulse transmitter or intelligent meter head, outputting pulse or current signals.
High metering accuracy, large flow range, good repeatability; Simple structure, reliable operation; Particularly suitable for measuring low-viscosity media, insensitive to changes in the viscosity of the measured liquid; Fluid state does not affect the metering accuracy, no straight pipe section is required before and after the flow meter. It has a field indication function, and is equipped with a photoelectric pulse transmitter or an intelligent meter head, outputting pulse and current signals. Communication protocol MODBUS or HART.
Telephone:
After sales:86-371-22950819
E-mail:kfybc@kfybc.com
Address: No.38 Bianjing Road, Shunhe Hui District, Kaifeng City, Henan Province