Product Series
The smart converter is fully functional, featuring multiple flow displays, bidirectional measurement, air pipe detection, automatic process diagnosis, and various outputs (dual current, dual pulse, dual alarm, RS485 (Modbus-RTU protocol), expandable to Profibus, Hart, 4G/NB communication, etc.).
Various lining material options: Neoprene lining; PTFE lining; Polyurethane lining; PFA lining, PFA lining with metal mesh is vacuum resistant; Tefzel lining, Tefzel lining with metal mesh is vacuum resistant.
The E-mag E series electromagnetic flowmeter is manufactured using the electromagnetic flowmeter technology from ABB KENT-TAYLOR Company in an OEM manner.
Measurement is not affected by changes in fluid density, viscosity, temperature, pressure, and conductivity; Novel excitation method, low power consumption, stable zero point, and high accuracy. The flow range can reach 1500:1; The intelligent converter is fully functional, with various flow displays, bidirectional measurement, empty pipe detection, slurry measurement, process automatic diagnosis, and multiple outputs (single current, single pulse, dual alarm, RS232/485, Modbus, Profibus, Hart communication); The converter uses surface mount technology (SMT) and has self-check and self-diagnosis functions; Three-line LCD dot matrix display with Chinese characters, convenient parameter setting, and reliable programming.
The MF/WD type electromagnetic flowmeter is powered by a 3.6V lithium battery pack. It can also be supplied with dual power sources according to site requirements, namely 220V + 3.6V lithium or 24V + 3.6V lithium (the matching converter is an IP68 integrated type). The standard lithium battery can operate continuously for more than 3 years. If paired with a high-capacity lithium battery pack, the continuous working time will be even longer.
Measurement is not affected by changes in fluid density, viscosity, temperature, pressure, and conductivity; The nominal diameter range is wide, suitable for all pipe sizes between DN200 and DN1800; The converter can be configured as an integrated or separated type with the sensor; The sensor can be directly installed on the user's metal pipeline or installed on standard short pipes provided by the manufacturer, with no lining required for the measuring pipe, featuring a simple structure and high reliability; The highly reliable external installation method allows for sensor installation and maintenance without disassembling the measuring pipe, making it suitable for use in locations where water cannot be shut off for long periods, and it can be installed on old pipelines with on-site drilling; The converter uses a novel excitation method, with low power consumption and stable zero point.
The MF/H heating type electromagnetic flowmeter is an inductive instrument used to measure the volume of heat in conductive fluids. The measurement of heat is calculated by multiplying the thermal value at the inlet and outlet by the flow rate; the flow measurement part is based on Faraday's law of electromagnetic induction.
The E-mag G-type non-liner electromagnetic flow measurement conduit uses a new composite material that possesses excellent mechanical, electrical, and chemical properties, allowing the conduit and liner of the electromagnetic flowmeter to be integrated into one design.
Telephone:
After sales:86-371-22950819
E-mail:kfybc@kfybc.com
Address: No.38 Bianjing Road, Shunhe Hui District, Kaifeng City, Henan Province